E36 cabrio Widebody “Phase 2”

380.00

 

Description

Full kit out of four pieces: x2 front overfenders, x2 rear overfenders

Same kit applies to a coupe. In order to meet convertible’s lower waist line in the boot area trimming about 20mm of rear panels top edge is suggested.

MATERIAL – Reinforced FRP, with the added layer of a multi-axial fiberglass cloth. This has improved structural rigidity of the fenders. Letting us make them very lightweight yet designed to withstand contacts with your rims edge, stones, blown tire etc.

The rear arch line will be reformed and lifted by approximately 20mm so you’ll be able to get rid of rake effect and properly level your E36. No more exposed rear axle and muffler.

 

+35mm front width per side
+52mm rear width  per side
A rear arch line will be reformed and lifted by approximately 15mm so you’ll be able to properly level your E36. No more exposed rear axle and muffler.
*Professional Installation by a body shop is recommended. Modifications may be necessary to ensure proper fitment and may include cutting, trimming, filling, sanding, and customizing.
*Prior to painting it is suggested to pre-heat the overfenders in order to release trapped air under a gel coat.

Additional information

Weight 8 kg
Dimensions 165 × 42 × 25 cm

You may also like…